......
QualityFishingReelParts
Super Free (SF)

The Super Free bearing-supported pinion gear system
(SF) was designed to eliminate friction on the spool
shaft during the cast. In standard baitcasting reels,
when the clutch bar is pressed down, the pinion gear is
freed and can actually drag on the spool shaft, creating
friction and limiting the length of the cast. With SF, the
pinion gear is supported by a ball bearing, and when
the clutch is disengaged the pinion gear and spool
shaft are kept in precise alignment. The result is zero
friction on the spool shaft for increased freespool.
High Effeciency Gearing (HEG)

HEG consists of not only the gears, but also the frame,
setplate, and handle-side sideplate. First we increased
the size of the drive gear and the pinion gear to offer
increased leverage and power. By using a one-piece
frame that incorporates the setplate and adding a
one-piece stamped sideplate, we have eliminated flex
in the drivetrain that causes normal gears to bind
under pressure. By eliminating the flex and increasing
the leverage, we are able to provide high-speed
retrieves and deliver an incredible amount of torque,
while maintaining the smooth, silent retrieve Shimano
reels are famous for.
Metal Series

The metal construction showcased in
some of our finest reels now appears
throughout our line of Metal Series
products. Metal frames not only keep
moving parts in precise alignment,
they also feature the use of the latest
anodizing, plating and painting
techniques for beautiful and durable
finishes.
Shimano Calcutta B Model# CT201B  Reel
A-RB

A-RB bearings are stainless steel ball bearings that
have been through the A-RB treatment process which
makes them at least 10 times more corrosion resistant
than standard stainless steel ball bearings.

•A-RB (Anti-Rust Bearings) are made of Stainless
Steel that has been through the A-RB process.
• At least 10 times more corrosion resistant than
standard Stainless Steel ball bearings.
• Easy Maintenance-no shield design allows for easy
flushing of debris and easy lubrication.
•Increased Bearing Speed-no shield design and
lighter viscosity lubrication reduce friction and allow
the bearing to spin faster and longer.
Variable Brake System (VBS)

VBS uses centrifugal force rather than magnets to aid
in controlling the cast. The individual brake weights,
when turned on, are forced outward at the beginning of
the cast when backlashes most often occur, causing
friction that reduces the speed of the spool. Once the
spool speed begins to slow, the pressure lessens,
allowing the spool to continue spinning. The result is a
much more consistent spool speed that is easier to
manage and takes advantage of the reel's maximum
casting distance. Settings range from zero weights
turned on for true freespool and up to 6 weights turned
on for extremely windy conditions and maximum cast
control.
Super Stopper

Super Stopper uses a one-way,
stainless steel roller bearing that
eliminates backplay. This provides
the angler with instant hooksetting
power.
S Compact Body

Power. Rigidity. Durability. A key element to our new
Calcutta D casting reels, the S-Concept Body feature
results in a reel that feels one size smaller in your hand,
plus offers durability from a cold-forged aluminum frame
for year-after-year fishing use. The B side (no handle)?
sideplate is part of the one-piece, contributing to both
rigidity and in-the-hand palming comfort.
X-Ship

X-Ship provides improved gear
durability. By supporting the pinion
gear on both ends with bearings, the
pinion gear maintains precise
alignment with the drive gear. This
means the gears will stay in the same
position under the heaviest loads.
The added benefit is that friction
between the spool shaft and gear are
eliminated. This will enhance the
casting performance of the reel with
lighter lures, and allow for longer
casts.
X Drag

It is all about leverage. Found on our
new Calcutta D reels, with X-Drag,
we reposition the reel handle closer
to the body to increase cranking
leverage, rigidity and torque. There is
less side-to-side tilt when you?re
either fighting a big bass or working a
big crankbait down deep, or throwing
extra-large baits to muskies, striped
bass, redfish and calicos.
Platinum Service Plan

With the Platinum Service Plan, when you register your
warranty you will receive coupons for discounted clean
and lube services ranging from half off to free. All
Platinum service plan reels are assured a 48 hour
turnaround time from Shimano or any Authorized
Warranty Center; shipping excluded.
Features

•Cold Forged Aluminum Frame,
Sideplates and Spool
•A-RB (Anti-Rust Bearings)
•Variable Brake System (VBS)
•Super Stopper
•Assist Stopper (excluding 50B, 100B
& 101B)
•Dartainium Drag
•3-Bolt Quick Take Down (2 Bolt on
50B)
•Septon Handle Grips
•Easy Access Sideplate (100 and 200
sizes only)
•Lo-Mass Drilled Spool System
(200GTB only)
•Drilled Crossbar (200GTB only)
•Clicker (400 & 700 only)
•3-Position Power Grip (400BSV, 700B
& 700BSV only)
•SV Power Paddles (400B only)
•Non-Levelwind Version (BSV models
only)
•Manual Return Clutch Lever (700
models only)
•Non-Disengaging Levelwind System
(400 & 700 only)
•Metal Series
•Approved for use in Saltwater
•Rated for use with mono,
Fluorocarbon and PowerPro lines
The Calcutta B features quality A-RB® Anti-Rust
Bearings to ensure years of smooth, trouble-free
performance, higher gear ratios, and easy access to
the Variable Brake System (VBS™) for easy cast
control. As before, the forged 1-piece aluminum
frame with aluminum spool and sideplates makes for
a strong, durable, and tight reel, and Septon®
handle grips provide maximum comfort. The GT
model features an incredibly sweet 8-bearing
system, while all others have a 4-bearing system (3
ball + 1 roller bearing); SV models are non-levelwind
versions equipped with oversized Power Paddles for
total cranking power; 400 and 700 Series reels have
clickers.
•Cold-forged aluminum frame, sideplates and spool
•A-RB (Anti-Rust Bearings)
•Variable Brake System
•Super Stopper®one-way roller bearing
•Dartainium® Drag for a wide range of drag settings
•Assist Stopper reduces the stress on the one-way
roller bearing
•CT 200GTB features Lo-Mass™ Drilled Spool
System
•3+1 Bearings
•Retrieve Range 23-28 (in)
•9-18.2 WEIGHT RANGE (oz)
•Star Drag
•9.5-16.5 (lb) Drag Power Range
•High Crank Power
•High Cast Rating
Specs
Series : Calcutta
Family Type : Round-Profile
Models Offered : 6
Key Feature : Cold Forge Aluminum
Frame,Sideplates,Spool
Ball Bearings : 3
Roller Bearings : 1
Maximum Drag (lb) : 9.5-16.5 (lb)
Retrieve Per Crank Range (in) : 23-28